Türkçe | English
Catalogs
TR
  1. Products
  2. HYDRAULIC GEAR PUMP AND MOTORS
  3. CAST IRON GEAR MOTORS

3TMW MOTORS

Two piece motors with cast iron body and flange. Wide range of shafts and flanges. Configurations with integrated valves are available. These motors are particularly suitable for all applications where traditional aluminum motors are used at the limit of their performance; eg. for installation on mobile equipment intended for heavy duty operating cycles, where pressures or mechanical stresses are typically higher. Group: Group 3 Displacement cm ³/giro - (in ³/rev): Group 3 - from 23,9 to 79,8 (from 1,46 to 4,87) Max. Pressure bar - (psi): up to 300 (4350) Speed rotation rpm: up to 3000

CAST IRON GEAR MOTORS-3TMW MOTORS

Two piece motors with cast iron body and flange. Wide range of shafts and flanges. Configurations with integrated valves are available. These motors are particularly suitable for all applications where traditional aluminum motors are used at the limit of their performance; eg. for installation on mobile equipment intended for heavy duty operating cycles, where pressures or mechanical stresses are typically higher. Group: Group 3 Displacement cm ³/giro - (in ³/rev): Group 3 - from 23,9 to 79,8 (from 1,46 to 4,87) Max. Pressure bar - (psi): up to 300 (4350) Speed rotation rpm: up to 3000

3TMW MOTORS

Two piece motors with cast iron body and flange. Wide range of shafts and flanges. Configurations with integrated valves are available. These motors are particularly suitable for all applications where traditional aluminum motors are used at the limit of their performance; eg. for installation on mobile equipment intended for heavy duty operating cycles, where pressures or mechanical stresses are typically higher. Group: Group 3 Displacement cm ³/giro - (in ³/rev): Group 3 - from 23,9 to 79,8 (from 1,46 to 4,87) Max. Pressure bar - (psi): up to 300 (4350) Speed rotation rpm: up to 3000

3TMW MOTORS

Two piece motors with cast iron body and flange. Wide range of shafts and flanges. Configurations with integrated valves are available. These motors are particularly suitable for all applications where traditional aluminum motors are used at the limit of their performance; eg. for installation on mobile equipment intended for heavy duty operating cycles, where pressures or mechanical stresses are typically higher. Group: Group 3 Displacement cm ³/giro - (in ³/rev): Group 3 - from 23,9 to 79,8 (from 1,46 to 4,87) Max. Pressure bar - (psi): up to 300 (4350) Speed rotation rpm: up to 3000

Stock Code: 3TMW

Category: CAST IRON GEAR MOTORS

Tüm hakları Lojik Hidrolik Pnömatik Mekanik'e aittir.
Yazılım Tasarım OMEDYA